![]() |
||||
|---|---|---|---|---|
|
||||
|
HOME | SITE MAP | CAREERS | LINKS | CONTACTS LEARNING | COMPANY | PRODUCTS | RESOURCES |
|||
| © 2011 Once Innovations, Inc. All rights reserved. No part of this Web Site may be reproduced without prior written permission. |
||||


Easy Installation Instructions
1. Position the run wire in an open tap connector (do not strip wire).
2. Fold the connector body until the element contacts wire, then crimp
the connector closed with pliers.
3. Plug the completed tap connector onto one of the 2 male tabs
located on the back of the LED module. There is no polarity required.
4. Repeat procedure for the second wire.
5. Fasten the LED module to the conduit body with 2 screws.